Products

Talus

Talus employs a patented method of counting by pattern recognition. The counter has four laserlike sensors mounted at ankle height. As a person walks through the count zone the sensors are sampled to produce a pattern. The pattern is then processed by the on-board neural network that was trained to count people. The neural network functions in similar fashion to the human brain. Essentially a matrix of neurons is interconnected with mathematical functions, a stimulus (in this case the pattern from the sensors) is presented to the network, this is then processed to present an output, which in the case of Talus is the IN and OUT counts. The neural network was trained by “show and tell” on over 35 000 patterns recorded at various sites to enable a representative a priori data set for training. Talus does not produce a count by comparing to known patterns or some other linear method, but rather, the result is obtained by neural calculation for each pattern presented.
Features
  • Greater than 96% accuracy
  • Bi-directional customer counting
  • Slim form factor and aesthetically pleasing device
  • Seamless integration onto the HeadCount network
  • Powerful detection and pattern recognition algorithms
  • Single counter can cover a width of up to 10 meters
  • 8MB non-volatile memory for 30 day storage of counts
  • Modern and fast 32 bit microprocessor
  • Advanced power solution for RTC (Real-Time Clock)
  • Onboard laser for swift and quick alignment, reducing setup time
  • Remote access for diagnostic interrogation and firmware updates
Counting Applications
Talus is intended for customer counting in: Shopping Centres, Retail, Airports, Casinos, Libraries, Museums, Galleries, Hotels, Convention Centres, Smart Building.
Counting Solutions
Entrance Counting
Intended for property owners who wish to accurately measure foot traffic into their establishment.
Passage and Inter-Level Counting
Entrance counting evolves to passage and inter-level counting whereby human occupancy can be measured according to segmented and defined areas and zones.
Retail Counting
Passage and inter-level counting naturally evolves to retail counting as the movement of customers can be monitored from the common areas into the retail stores by measuring foot traffic at each shop.
Technical Data
Performance

Accuracy: > 95% per 200 people sample
Maximum width: 10m

Mechanical

Housing: Anodised Aluminium
Mounting: Recessed or Floor-mount
Tray Dimensions: 517mm x 113mm x 40mm (w x h x d)
Recessed Dimensions: 679mm x 174mm x 12mm (w x h x d)
Floor-Mount Dimensions: 627mm x 165mm x 80mm (w x h x d)

Environmental

-10°C to +60°C
-40°C to +80°C

Compliance

Standard

CISPR22, CISPR24, IEC61000-4-2, IEC61000-4-3,
IEC61000-4-4,
IEC61000-4-6

Oculus

Oculus is a highly accurate, cost effective and aesthetically pleasing people counter. Oculus is Nortech’s advanced retail traffic counter with imaging optics, onboard processing and interfacing electronics all contained within a sleek moulded plastic housing. The Oculus unit is a monocular camera based system that captures video from overhead and processes it to count the people by utilizing a patented pattern recognition algorithm. The onboard processor seamlessly connects the Oculus to the HeadCount network via an uplink port or to the Internet via a wired or wireless Ethernet uplink. The downlink port facilitates downstream connectivity on the HeadCount network. The elegant design complements modern commercial and retail spaces. The overhead counter is ideal for narrow passages or store entrances with moderate visitor traffic flows where maximum performance is required.

Oculus delivers key metrics such as total visitors, store conversion rates, flow rates, store occupancy, dwell time, visitor spin, traffic per labour hour ratios and many more.

Features
  • Greater than 95% accuracy per 200 people sample
  • Bi-directional visitor counting
  • High accuracy, low cost counter
  • Non-intrusive and aesthetically pleasing device
  • No PC required for standalone solution
  • Seamless integration onto the HeadCount network
  • Powerful detection and pattern recognition algorithms
  • Single counter can cover a width of up to 6 metres
  • Battery backup in the event of network power loss
  • Built in diagnostics
  • Quick setup device
Counting Applications

Oculus is intended for customer counting in: Retail, Casinos, Banks, Hotels, Museums, Galleries, Libraries, Convention Centres, Offices and Tower Blocks and Smart Buildings

Counting Solutions

Standalone: Intended for individual store owners who wish to accurately measure foot traffic in their retail shop.
Networked: Intended for retail chain owners who wish to measure foot traffic across their entire retail portfolio.
Integrated: Intended for shopping centre owners who wish to expand their HeadCount backbone by measuring foot traffic at every store throughout a shopping centre.
Master-slave: Intended for passages wider than a single unit’s supported ground coverage. Cooperatively uses up to 6 units to count a single passage of up to 33m wide (Only supported over ethernet).

Technical Data
Performance

Standalone: Intended for individual store owners who wish to accurately measure foot traffic in their retail shop.
Networked: Intended for retail chain owners who wish to measure foot traffic across their entire retail portfolio.
Integrated: Intended for shopping centre owners who wish to expand their HeadCount backbone by measuring foot traffic at every store throughout a shopping centre.
Master-slave: Intended for passages wider than a single unit’s supported ground coverage. Cooperatively uses up to 6 units to count a single passage of up to 33m wide (Only supported over ethernet).

Performance

Accuracy: > 95% per 200 people sample
Maximum flow rate: 15 people per minute
Minimum Illumination: 2 Lux (ambient)

Standard Mount Mode

Minimum Height: 2.4m
Maximum Height: 4.5m

High Mount Mode

Minimum Height: 4.5m
Maximum Height: 8.0m

Coverage Area

3.0m at 4.5m mounting height
6.0m at 8.0m mounting height

Master Slave

Maximum unit count: 6
Coverage Area: 9.7m for 6 units at 2.4m mounting height 33m for 6 units at 4.5m mounting height

Mechanical

Housing: Plastic ABS
Dimensions: 120mm x 50mm
Weight: 200g
Mounting: Two fixed slots in base

Environment

The Oculus counter is intended for indoor counting applications.
Operating Temp.: +10°C to +50°C
Storage Temp.: -10°C to +60°C

Compliance

Standards:

CISPR22 and CISPR24 IEC61000-4-2,
IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
IEC61000-4-6, IEC61000-4-11

Find out more at Oculus – Electronic Specification Sheet and Oculus Datasheet.

For more information, please contact GIB Automation at enquiries@gibauto.com.sg